Tecna has launched an Outdoor line of balancers, built for tools, cables, hoses and charging connectors that have to be suspended outside or in open-sided buildings. The range is tested for operation from -40°C to +60°C and is available now through Total Airtool Services.
Why a standard balancer struggles outdoors
A standard spring balancer is designed for a dry, temperature-controlled factory. Mount one under a canopy, in a wash bay or on an external gantry and moisture, frost, road salt and cleaning chemicals start to work on the housing, the rope and the spring. The result is corrosion, a rope that wears quickly and tension that becomes harder to control.
What is different about the Outdoor line
- Housing: powder-coated aluminium, designed to resist oxidation and chemical attack.
- Exterior parts: rustproof and stainless-steel materials throughout.
- Cable: stainless-steel cable on the spring and zero gravity models, synthetic fibre rope on the 9702OD.
- Temperature range: tested from -40°C to +60°C.
- Capacities: spring balancers from 0.2 to 14 kg, with zero gravity outdoor versions up to 180 kg and HPC cable management kits for EV charging.
- Options: custom stroke lengths on request and a STOP device on selected models.
Where outdoor balancers are used
Much of the demand comes from electrification. Charging cables for electric vehicles are heavy, they are handled many times a day and they are often installed outside. A balancer keeps the cable and connector off the ground, at a height the operator can reach, and returns it out of the way after use.
- Charging electric forklifts, pallet trucks and warehouse fleets
- High-power EV charging, including commercial car parks and eBus and eTruck depots
- Airport ground support equipment and electric baggage handling systems
- Hose management in car wash and vehicle cleaning facilities
- Tools and air lines in loading bays and open-sided industrial areas
Choosing the right model
The selection rules are the same as for any balancer. Choose a capacity rated at least 20% above the total suspended weight, including the cable or hose. Allow enough stroke for the lowest point the operator needs to reach. Then confirm the mounting point and the conditions the unit will be exposed to. Our guide to choosing a tool balancer covers this in more detail.
Outdoor balancers are specialist items and are supplied on quotation rather than from stock. Send us the load, the stroke and a description of the installation, and we will recommend the right model.
View the Tecna Outdoor Balancers range or request a quote. You can also call 01926 857193.
